37
Start-up
You can connect the device either to the Access
Point or to the Homematic Central Control Unit
CCU2. For detailed information, please refer to
the Homematic IP User Guide, available for down-
load in the download area of www.eQ-3.de.
To integrate the blind actuator into your system and enable
it to communicate with other Homematic IP devices, you
must teach-in the device to your Homematic IP Access
Point first.
To teach-in the blind actuator, please proceed as follows:
• Open the Homematic IP app on your smart-
phone.
• Select the menu item
“Teach-in device”
.
• After installation, the teach-in mode of the device
remains activated for 3 minutes.
If the time has exceeded, you can manually re-
start the teach-in mode for another 3 minutes by
removing the rocker and pressing the system
button
(A)
shortly (
see figure 5
).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
Summary of Contents for HmIP-BBL-2
Page 2: ...2 3 4 5 ...
