38
Operation
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up
green. The device is now ready for use.
• If the LED lights up red, please try again.
• Complete the setup of your blind actuator by fol-
lowing the instructions in the app.
• In the app, give the device a name and allocate
it to a room.
8
Operation
After setup, you can perform initial operating functions
via the push-button rocker switch:
• Short button press upper button: The motor for
the blinds/shutters/awnings moves into the cor-
responding end position.
• Short button press lower button (opposite direc-
tion): The motor stops.
• Long button press: The motor is controlled so
that you can adjust the slat position of the blind.
9
Troubleshooting
9.1
Command not confirmed
If at least one receiver does not confirm a command, the
device LED lights up red at the end of the failed trans-
mission process. The failed transmission may be caused
Summary of Contents for HmIP-BBL-2
Page 2: ...2 3 4 5 ...
