background image

Page  

ASSEMBLY

Fig. 5

26cs

grass 

deflector

bolt

wing

nut

flat 

washer

 

For the MightyLite 26CS: Slide the string into the hous-
ing eyelet and pull outward to rotate the spool into the 
cutting position.

 

For the MightyLite 26SS: Slide strings into the housing 
eyelets and pull outward to rotate the spool into the cut-
ting position. 

  Push the spool retainer down while pulling on string(s) 

to manually advance the string and to check for proper 
assembly of the string head.

CURVED SHAFT GRASS DEFLECTOR  – 

MIGHTYLITE 26CS

See Figure .

WARNING:

The line cutting blade on the grass deflector is sharp. 
Avoid  contact  with  the  blade.  Failure  to  avoid  contact 
can result in serious personal injury.

  Remove  the  bolt,  washer,  and  wing  nut  from  grass 

deflector.

  Press the grass deflector onto the bottom of the curved 

shaft as shown.

  Insert the bolt through the grass deflector and the bracket 

on the curved shaft.

  Place the washer on the bolt.

  Place the wing nut on the bolt and tighten securely.

STRAIGHT SHAFT GRASS DEFLECTOR – 

MIGHTYLITE 26SS

See Figure .

  Remove the wing nut and mounting bracket from the grass  

deflector.

  Assemble straight shaft grass deflector to drive shaft so 

that the pin in the grass deflector fits in the locator hole 
in the lower side of the drive shaft near the gear head.

  Place the mounting bracket over the drive shaft so the 

square tab on the mounting bracket fits into the slot in 
the straight shaft grass deflector.

  Rotate the mounting bracket so the screw on the grass 

deflector goes into the slot on the mounting bracket.

  Reinstall the wing nut and tighten securely.

Fig. 4

pull 

strings to 

secure

slots

Fig. 6

drive 

shaft

grass 

deflector

gear 

head

wing nut

mounting 

bracket

slot

screw

26ss

pin

square

tab

slot

Summary of Contents for MightyLite 26cc























Reviews: