background image

Page 10 

OPERATION

WARNING:

Do  not  allow  familiarity  with  this  product  to  make  you 
careless. Remember that a careless fraction of a second is 
sufficient to inflict serious injury.

WARNING:

Always wear safety goggles or safety glasses with side 
shields when operating power tools. Failure to do so could  
result in objects being thrown into your eyes, resulting in 
possible serious injury.

WARNING:

Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of  
attachments or accessories not recommended can result 
in serious personal injury.

FUELING AND REFUELING THE TRIMMER
FUEL MIXTURE

This product is powered by a 2-cycle engine and requires 
pre-mixing gasoline and 2-cycle lubricant. Pre-mix unleaded  
gasoline  and  2-cycle  engine  lubricant  in  a  clean  1  gallon 
container approved for gasoline.
Recommended fuel: This engine is certified to operate on 
unleaded gasoline intended for automotive use.
Mix Homelite 

Premium Exact Mix lubricant with gasoline  

according to the instructions on the package. If 

Premium 

Exact Mix lubricant is not available, use a high quality syn-
thetic 2-cycle engine lubricant, mixed at 2.6 oz. per gallon 
(US).
Do not use automotive lubricant or 2-cycle outboard lubri-
cant.

NOTE: Premium Exact Mix fuel mix will stay fresh up to 
30 days. DO NOT mix quantities larger than usable in a 30 
day period.

   

PREMIUM EXACT MIX (50:1)

 

GASOLINE 

LUBRICANT

 

1 gallon (US) 

2.6 oz.

 

1 Liter 

20 cc (20 ml)

FILLING TANK

  Clean  surface  around  fuel  cap  to  prevent  contami-

nation.

  Set trimmer on its side so that the spout points up.

  Loosen  fuel  cap  slowly.  Rest  the  cap  on  a  clean  sur-

face.

  Carefully pour fuel into the tank. Avoid spillage.

  Immediately replace fuel cap and hand tighten. Wipe up 

any fuel spillage.

NOTE:  It  is  normal  for  smoke  to  be  emitted  from  a  new 
engine after first use.

WARNING:

Always shut off engine before fueling. Never add fuel to 
a machine with a running or hot engine. Move at least 
30 ft. from refueling site before starting engine. Do not 
smoke!

Summary of Contents for MightyLite 26cc























Reviews: