TO CHANGE ATTACHMENTS
Your massager comes equipped with two massage head
attachments. Each set is a different firmness to allow you
to customize your massage:
Black - Soft attachment without heat
Red - Hard attachment with heat
To change to a different set, simply twist off (counter-
clockwise) the set that is attached to the unit and twist
on (clockwise) the desired set. (See Figure 1)
MAINTENANCE
TO CLEAN:
Be sure to unplug the unit and allow it to cool before cleaning. Use a soft, slightly damp cloth to wipe.
NEVER
allow water or any liquids to come into contact with the handle.
TO STORE:
Unplug the appliance from the outlet and allow it to cool before storing in its box or a clean, dry place.
DO NOT hang the unit by the powercord.
PLEASE NOTE:
The heat option will only work while a massage feature is selected.
CAUTION: All servicing of this unit must be performed by authorized HoMedics service personnel
only.
5
INSTRUCTIONS FOR USE
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the
other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. DO
NOT change the plug in any way.
1.
A LWAYS
make sure the unit is set to the “OFF” position before inserting the plug into a 120-vol
electrical outlet.
2.
MASSAGE:
To turn the unit on, simply slide the ON/OFF switch, located along the top of the unit’s
handle up. Slide the switch up one position for the low intensity setting and up two positions for the
high intensity setting. To turn the unit off, slide the switch to the “OFF” position.
3.
MASSAGE WITH HEAT:
Locate the two red attachments. Attach to the massage heads by turning
clockwise to secure. Slide the Heat button up for heat. Allow a few minutes for heat to fully acti-
vate. To turn the heat off, slide the switch to the “OFF” position.
NOTE
: Do not use the heat continuously for more than 15 minutes. Do not use the heat if you have
sensitive skin, poor circulation, discolored areas, swelling, burned, inflamed or where skin erup-
tions or sores are present. Heat should be pleasant and comfortable. Should pain or discomfort
result, discontinue use and consult your physician.
4. Apply massager head lightly to the area you wish to massage.
5. Move the unit slowly, holding on the targeted area. Massage the area for a short period of time and
move to another area.
NEVER
massage the same spot longer than 3 minutes.
CAUTION - NEVER use this appliance on or near eyes or other highly sensitive areas.
6. Operation of longer than 15 minutes is not recommended and may cause overheating.
7. When massage is completed, turn unit off, allow to cool, unplug the power supply and store properly
in a dry place.
4
Figure 1
To
Remove
To
Apply
