4
5
from any physical ailment that would limit the user’s capacity to operate the controls, or who
has sensory deficiencies.
• Always unplug the unit when filling or moving the unit.
• Ensure that your hands are dry when operating the controls or removing the plug.
• This appliance is intended for household use only.
Servicing of Double-Insulated Products
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor should a means for
grounding be added to the product. Servicing a double-insulated product requires extreme
care and knowledge of the system and should be done only by HoMedics authorized service
personnel. Replacement parts for a double-insulated product must be identical to the parts
they replace. A double-insulated product is marked with the words “DOUBLE INSULATION” or
“DOUBLE INSULATED” The symbol “ ” may also be marked on the product.
Polarized Plug
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider
than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
Instructions for Use
1. Ensure that the unit is unplugged before filling with water. Fill with warm water to the fill line
located on the inside of the tub.
NOTE:
The footbath will not heat cold water. For a warm water massage, fill unit with
warm water.
CAUTION:
Do not fill water over the fill line.
2. Place the unit on a waterproof surface, or any surface that cannot be damaged by splashing water.
3. Plug the unit into a 120 volt household outlet.
4. Sit down in a comfortable position. With the touch of your toe, press the on/off button.
5. Select hydro jet massage, vibration massage, or both by pressing the corresponding
buttons on the control panel.
6. Manually massage your heels, arches, and toes by rubbing your feet over the center
massage node.
7. To empty: first, unplug the unit. Take the foot spa to the closest drain and tip the unit allowing
water to pour out along the drain spout. DO NOT pour water over the control panel.
NOTE:
To reduce splashing due to different water displacements of feet, raise or lower the
water level of the footbath.
Maintenance
To Clean
Unplug the unit and allow it to cool before cleaning. Clean only with
a soft, damp cloth and mild cleansing agent.
• After cleaning, wipe surfaces with a dry cloth.
• Never use strong abrasives, detergents or cleansing agents.
• Periodically straighten cord if it becomes twisted.
To Store
Unplug the appliance from the outlet and allow to cool and dry.
• Store in its box or a clean, dry place.
• To avoid breakage, do not wrap the power cord around the unit.
• Do not hang the unit by the power cord.
• This appliance is designed for household use only.
Caution:
To avoid injury
and irreparable
damage, always
remain seated
when using this
foot massager.
Never stand on
or in the unit.
CAUTION: THIS
UNIT CAN ONLY
RUN WITH
WATER IN IT.
DO NOT USE
WITHOUT
WATER.
