6
Operating Instructions
1. Ensure that the unit is unplugged before filling with water. Fill with
warm water to the fill line located on the inside of the tub.
CAUTION: DO NOT FILL WATER OVER THE FILL LINE
ALWAYS MAkE SURE TO USE TWO HANDS WHILE
CARRYING A FULL FOOTBATH.
NOTE:
The footbath heat water. The footbath will heat water once
unit is turned on.
2. Plug the unit into a 120 volt household outlet.
3. Press power button once to turn on bubbles and heat (Fig 1).
4. While seated, place your feet in the footbath.
5. Enjoy a deep soothing massage by sliding feet back and forth
over the raised nodes on the footbath floor or over center
massage node (Fig 2).
6. Enjoy a dry foot massage by sliding feet back and forth over the
center massage node (Fig 2).
7. When finished, depress power button once.
8. To empty: First, unplug the unit. Tip the unit, allowing water to pour
out along the rear corner of the footbath. DO NOT pour water over
the power button (Fig 1).
Maintenance Instructions
To Clean
Unplug the unit and allow it to cool before cleaning. Clean only with a
soft, damp cloth and mild cleansing agent.
• After cleaning, wipe surfaces with a dry cloth.
• Never use strong abrasives, detergents, or cleansing agents.
• Periodically straighten cord if it becomes twisted.
To Store
Unplug the appliance from the outlet and allow to cool and dry.
• Store in its box or a clean, dry place.
• To avoid breakage, do not wrap power cord around the unit.
• Do not hang the unit by the power cord.
Caution:
To avoid
injury
and
irreparable
damage,
always
remain
seated when
using this
footbath.
Never stand
on or in
the unit.
CAUTION:
THIS UNIT
CAN ONLY
RUN WITH
WATER IN IT.
DO NOT USE
WITHOUT
WATER.
7
Center
Massage
node
Power Button
Massaging
arch support
4 Pressure node rollers
Fig. 1
Fig. 3
Fig. 2
integrated
Carry handle
FB-400-IB_R5.indd 7-8
6/18/15 9:19 AM