4. Rinse your face with warm water and pat dry with a towel.
5. Lightly coat a cotton ball with facial toner provided.
Sweep cotton ball across face to refresh and remove any
remaining impurities.
6. Press the mist button to spray a gently mist across your
face to close your pores once cleansing is complete.
3. Using the microdermabrasion sponge attachment apply a thin
layer of microdermabrasion cream to the sponge.
• Dot the sponge onto your forehead, chin and cheeks.
• Turn the facial unit to LO and work the microdermabrasion cream
into your skin using slow, upward circles, concentrating on each
area for intervals of 10 to 15 seconds. The crystals will exfoliate
and remove the dull surface layers to reveal healthier skin.
• When comfortable with the process you may turn the unit to HI.
Continue this process for five to ten minutes. NOTE: Keep the
microdermabrasion cream away from the eye area.
7. Apply facial cream to the
massage roller attachment.
Turn the facial unit to LO
and work the facial cream
into your skin using circular,
upward strokes, concentrating on each area for intervals
of 10 to 15 seconds. When comfortable with the process
you may turn the unit to HI. You may also use this
attachment to tone your face and neck.
9
Cleaning the Appliance:
1. Remove the attachment from the facial unit.
2. To clean use a damp cloth to wipe down the facial unit. DO NOT RINSE
APPLIANCE UNDER WATER. Unit is NOT waterproof.
3. Attachments should be removed and then rinsed under warm water until clean.
DO NOT place appliance under running water – only attachments.
4. Empty any remaining water from the mist chamber.
5. Use small cleaning brush provided to clean out the attachment socket, mist
chamber and the mist sprayer.
6. Allow facial unit and attachments to dry before storing. NOTE: Never use ben-
zene, thinners, or any other organic solvents to clean the product. Use of these
cleansers will damage the unit.
Storing:
Store facial unit in the charging base. Place the five attachments and cleaning brush
back into its storage case. Store the lotions and additional attachments in the
drawstring bag.
2. Use large and small suction cup attachments to
deep clean your pores and remove impurities
from below the skin’s surface.
Steps for a Complete Microdermabrasion Facial:
1. Use cleansing brush attachment with facial
cleanser provided in circular motions
on your face to gently exfoliate.
8
PP-4
Nam
Add
City
Rep
PAR
Ma
HoM
Serv
3000
Tow
Deta
Plea
You
FAC-200 10/6/03 3:24 PM Page 9
