Cleansing & Microdermabrasion Features
• 2 Facial Cleanser attachments – cleansing brush and massage rollers
• 2 Pore Refiner attachments - large suction cup and small suction cup
• 3 Microdermabrasion sponges
• 2 speeds
• Mister to close pores
• Storage case for attachments and drawstring bag for appliance and lotions
• Rechargeable Design
• 2oz facial cleanser, 2oz microdermabrasion cream, 2oz facial toner and
2oz moisturizing facial cream
Instructions For Use
To Charge:
Follow this procedure before you use this product for the first time.
To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician to install the proper outlet. Do not
change the plug in any way.
1. Plug the charger base into a 120-volt outlet. Place the unit into the base
and allow it to charge for at least 16 hours before using it for the first time.
2. The indicator light on the base will glow red when the unit is
correctly placed in the charger base. This is an indication that the unit is
charging. The red LED indicator will turn off when the unit is removed from
the base.
3. The optimum voltage for charging is 120V.
4. To maintain the unit’s full performance, it should always be placed back
on the charging base after use.
NOTE: Charge for at least 16 hours before using the unit for the first time
NOTE: For best results, use this unit after a shower or after you have steamed
your face so that pores are open and ready for deep cleansing.
4
5
To Use the Spinning Facial Cleanser Attachments:
1. Select the desired attachment to begin your facial.
• Cleansing Brush – Use with your favorite soap or facial cleanser provided
to gently cleanse face and neck
• Microdermabrasion Sponge – Use with microdermabrasion
cream to exfoliate
• Massage Rollers – Tone and relax facial and neck muscles
2. Snap on attachment (Fig. 2).
3. Select your desired speed – Press the on/off button once for LO and twice
for HI. Corresponding LEDs will light to indicate LO or HI.
4. When finished, turn the unit off, remove and rinse the attachment.
5. Place facial unit back into the charging base.
Microdermabrasion
cream
Facial cream
Facial cleanser
Facial toner
Charging
Base
Mist
Button
On/Off
Mist
Sprayer
Facial
Unit
Figure 1
(3) Microdermabrasion sponge
Small suction cup
Large suction cup
Cleansing brush
Massaage Rollers
FAC-200 10/6/03 3:24 PM Page 5
