7
Strapping System
This back lumbar massager incorporates a unique strapping
system which allows you to fasten it to most any chair. Pull
strap from left and right sides around the chair and fasten with
the clips.
Automatic Shut Off
The massager has been designed for convenience and safety.
As a special precaution against falling asleep while using the
unit, or leaving the unit on while it is still in operation, we’ve
programmed it to automatically stop working 15 minutes after
receiving your last command. This special feature should not
be considered as a substitute for OFF. Always remember to
turn your unit off when not in use.
Maintenance
To Store
Place massager in its box or in a safe, dry, cool place. Avoid
contact with sharp edges or pointed objects. To avoid break-
age, DO NOT wrap the power cord around the unit. DO NOT
hang the unit by the controller cord.
To Clean
Unplug the unit and allow it to cool before cleaning. Clean
only with a soft, slightly damp sponge. NEVER allow water
or any other liquids to come into contact with the unit.
• DO NOT immerse in any liquid to clean.
• Never use abrasive cleaners, brushes, or strong chemicals
that might or might not be flammable and/or damaging to
the product to clean.
• DO NOT attempt to repair the massager. There are no user
serviceable parts. For service, send the unit to the
HoMedics address listed in the warranty section.
6
Caution:
All servicing
of this
massager
must be
performed by
authorized
HoMedics
service
personnel
only.
Heat Button
Activates Heat
Strong Massage Action
Rejuvenates neck and
shoulder muscles
Cushioning micropedic™ beads add
comfort and support.
Power Button
Activates massage
Soothing Heat
Relaxes overworked
muscles
Lumbar Back
Massager
with Heat
Please note:
Not recom-
mended for use
against wooden
surfaces as the
zipper may
damage the
wood. Caution
is also recom-
mended when
using against
upholstered
furniture.
NOTE:
When selecting
the heat feature with massaging
action, there will be a slight
decrease in the strength of the
massage output. This adjustment
is perfectly normal and should
not be interpreted as a defect.
