manualshive.com logo in svg

HOMEDEPOT SSCL, Instruction Manual, Page: 6 / 40

Share
Download
HOMEDEPOT SSCL Instruction Manual Download Page 6

6

1.2  General Precautions

1.2.1 Overall Precautions

When handling the cultivator, follow the precautions of the powerhead manual in addition to the following 
precautions.

Do not use the cultivator when tired, ill, or after consuming alcohol, drugs, or 
medication.
Do not use the cultivator with the rotary cover removed.

*  It could cause a serious injury as a result of flying debris, etc.

Be sure to firmly tighten the knob bolt at the attachment connection before 

using the attachment.

*  The attachment could come off, resulting in serious injury or death.

Do not use the cultivator for any purpose other than cultivating.

Do not allow minors to operate the cultivator.

Do not modify the cultivator.

Do not install any unapproved powerhead to the attachment.

Do not remove the safety devices.

Do not touch the blade during operation.

If you lend or rent the cultivator, be sure to provide the user with this manual 

and the powerhead instruction manual.  Also, advise the user that he or she 

needs to have a good understanding of the content of both manuals before 
starting any work. 

Always shut off the engine and remove the cultivator from the powerhead 

before handling the blade.

Summary of Contents for SSCL









































Reviews:

No comments