manualshive.com logo in svg

HOMEDEPOT SSCL, Instruction Manual, Page: 5 / 40

Share
Download
HOMEDEPOT SSCL Instruction Manual Download Page 5

5

1.1.2 Warning Labels

 Cautions for Handling

(a)  This cultivator is provided with warning labels to indicate important cautions. Understand the 

meanings of the warning labels thoroughly to work in a safe environment.

(b)  Do not operate the cultivator until you have a good understanding of the meanings of the warning 

labels. If you do not understand the meanings, contact your servicing dealer.

(c)  Be sure to observe the warning labels and warning messages in the instruction manual at all 

times while handling the cultivator.

(d)  Do not remove or damage the warning labels. Also, do not clean the warning labels with solvent.
(e)  Do not paint the warning labels when repainting the cultivator.
(f)  If the warning labels become illegible, damaged or removed, purchase new ones from your 

servicing dealer, and attach them in accordance with the “■ Warning Labels and Attached 

Locations”.

 Warning Labels and Attached Locations

1

Be sure to read the instruction manual and completely understand it before use.

2

If the rotating blade hits your hands or legs, it could result in a serious injury such as cutting of 

fingers or legs

.

1 

2 

(Attached on the top side)

Summary of Contents for SSCL









































Reviews:

No comments