HOMEDEPOT SSCL Instruction Manual Download Page 3 | Manualshive

Page: 3 / 40

HOMEDEPOT SSCL Instruction Manual Download Page 3

3

Important Cautions for Safe Work

●

NIKKARI Co., Ltd. (hereinafter referred to as NIKKARI) cannot foresee all the risks in handling the
cultivator. Therefore, also give consideration to general safety measures not stated in this manual and
powerhead manual to prevent injuries when handling the cultivator.

●

The cultivator is a high-speed tool for cultivation. To decrease risk of personal injury, special safety
precautions must be observed. If it is used carelessly or inappropriately, the blade could make contact

with hands or body, resulting in a fatal or serious injury such as amputation of hands or fingers.

Important Cautions for Instruction Manual

●

This instruction manual is copyrighted and all rights are reserved. This instruction manual, in whole or
part, may not be copied, translated or reproduced to any electronic medium or machine readable without
prior written consent from NIKKARI.

●

The contents described in this instruction manual and powerhead manual are subject to change without
prior notice.

● Illustrations or figures shown in this instruction manual may partially differ from your cultivator.

●

If you lend or rent the cultivator, be sure to provide the user with this manual and the powerhead
instruction manual. Also, advise the user that they need to have a good understanding of the content of
both manuals before starting any work.

●

If this instruction manual or powerhead manual is lost or damaged, order a replacement from your
servicing dealer immediately.

●

If you have any questions about descriptions in this manual or powerhead manual, contact your
servicing dealer.

●

The names of companies and products described in this manual are generally trademarks or registered
trademarks of each company.

«
1
2
3
4
5
...
»

Summary of Contents for SSCL









































Reviews:

No comments