background image

Copyright (C) 2015 NIKKARI Co., Ltd. All Rights Reserved

For Safe Use of Cultivator Attachment

 

Be sure to read this manual and the powerhead 
(separately sold) manual to have a good understanding 
of the contents before handling the cultivator.

 

If there is no powerhead manual, you can purchase 
one from your servicing dealer.

 

Keep this manual and the powerhead manual in a 
readily accessible location.

Contents

Important Information ···················· 2
1. Safety ··································· 4

1.1 Warnings ·······································4
1.2  General Precautions ························6
1.3  Safety Devices and Protective Guard ······ 10
1.4  Protective Equipment ····················· 11
1.5 Noise ·········································· 11
1.6 Vibration ······································ 11

2. Outline ·································12

2.1  Name of Parts and Their Functions ········· 12

2.2  Specification

 ································ 13

2.3  Packaged Materials ······················· 13
2.4  Position of Model and Serial No. ··········· 14
2.5  Replaceable Items ························· 14

3. Installation ····························15

3.1  Installation Method ························ 15

4. Operation ·····························18

4.1  Transporting Method ······················ 18
4.2  Pre-operation Check ······················ 19
4.3  Start and Stop ······························ 19
4.4  Precautions for Operation ··············· 20
4.5 Cultivation···································· 21
4.6  Actions after Operation ··················· 23

5. Maintenance ·························24

5.1 Daily ··········································· 25
5.2  Every 20 hours or 3 months ············· 25
5.3  As Necessary ······························· 25

6. Storing ·································30
7.  Waste Disposal ······················33
8. Troubleshooting ·····················33
9. Servicing ······························34
10. Technical data  ·······················35
How to Contact Honda ·················36
Distributor's Limited Warranty ········37
PRODUCT REGISTRATION ··········39

Cultivator Attachment 

SSCL

Instruction Manual

SSCL

Summary of Contents for SSCL









































Reviews: