HOMEDEPOT 1001628059 Use And Care Manual Download Page 16 | Manualshive

Page: 16 / 21

background image

I

G

KK

UU

J

K

TT

9

10

Attaching the LED light kit
and glass shade

Assembly — Installing the Light Kit

CAUTION:

Before starting installation, disconnect the

power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.

□

Remove one of the three light kit mounting screws

(KK) from the switch housing (I) and loosen the other
two screws (KK). (Do not remove.)

□

While holding the 28W LED light kit (J) under the fan

motor assembly (G), make the 2-pin (TT) and 6-pin
(UU) wire connections.

□

Place the key holes in the 28W LED light kit (J) over

the two mounting screws (KK) previously loosened
from the switch housing (J). Turn the 28W LED light
kit (J) until the 28W LED light kit (J) locks in place at
the narrow section of the key holes. Secure by
tightening the two light kit mounting screws (KK)
previously loosened and the one (KK) previously
removed.

□

Raise the glass shade (K) up against the 28W LED

light kit (J) and secure it to the fan by turning the
glass shade (K) clockwise until snug. DO NOT
OVERTIGHTEN.

Attaching the switch housing
to the mounting ring

CAUTION:

Before starting installation, disconnect the

power by turning off the circuit breaker or removing the fuse
at the fuse box. Turning power off using the fan switch is not
sufficient to prevent electric shock.

RR

JJ

SS

G

I

□

Remove one of the three switch housing mounting

screws (JJ) from the mounting ring (RR) and loosen
the other two screws (JJ). (Do not remove.)

□

While holding the switch housing (I) under the fan

motor assembly (G), snap together the wire
connection plug with the 9-pin (SS) plug from the
switch housing (I).

□

Place the key holes in the switch housing (I) over the

two screws (JJ) previously loosened from the
mounting ring (RR). Turn the switch housing (I) until
the switch housing (I) locks in place at the narrow
section of the key holes. Secure by tightening the two
mounting screws (JJ) previously loosened and the
one (JJ) previously removed.

16

«
...
14
15
16
17
18
...
»

Summary of Contents for 1001628059






















Reviews:

No comments

Related manuals for 1001628059

Brand: Lasko Pages: 2

ALPATEC BOREAL 12 LEGEND

Brand: Taurus Pages: 36

Brand: Faro Barcelona Pages: 20

Brand: Sartorius Pages: 30

Brand: ebm-papst Pages: 5

Brand: Sonnenkonig Pages: 40

Edgewood TF900 Series

Brand: Fanimation Pages: 14

Brand: ECG Pages: 76

ARMITAGE CC52WW5C

Brand: Harbor Breeze Pages: 34

AVENUE CF766ORB

Brand: Emerson Pages: 20

Amphora F2200HTW02

Brand: Emerson Pages: 12

AIRA ECO CF985BS00

Brand: Emerson Pages: 30

Brand: Emerson Pages: 20

AVONDALE CF810AP

Brand: Emerson Pages: 16

Brand: Emerson Pages: 24

APOLLO CF3900AB01

Brand: Emerson Pages: 12

Brand: Emerson Pages: 11

AVONDALE CF810AP00

Brand: Emerson Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands