Power On / Off and Mist Adjustment
Plug the power cord into a wall socket. Now the humidifier is ready for use.
1. Rotate the control knob clockwise to the ON position. The white LED indicator will light up
indicating the humidifier has been turned on to a minimum mist level.
2. Keep rotating the control knob clockwise to increase the mist level.
3. Rotate the control knob counterclockwise to the OFF position to turn off the humidifier. The
LED indicator will turn off. The fan will work for another 3 minutes to dry the mist tube.
The most comfortable environmental humidity is between 40%-60%. Please adjust the mist
as needed.
Low Water Protection: Auto Shut-off the Humidifier
When there is not enough water inside the water reservoir, the humidifier will stop misting and
the LED indicator will become red. It is designed for safety to prevent the humidifier from
possibly overheating and damaging the atomizer.
CLEANING AND MAINTENANCE
Caution
1. DO NOT submerge the base in water.
2. Make sure water does not enter the base through the air outlet, air inlet,
or the control knob.
3. DO NOT wash any part of this humidifier in dish washer which will
damage the humidifier and void the warranty.
Daily Maintenance
Turn off the humidifier, unplug it from the power source. Drain water from the tank, reservoir
and base.
Weekly Maintenance
1. To properly clean your humidifier, we recommend you to remove scale and disinfect the
humidifier separately.
2. DO NOT mix vinegar and bleach solutions together. Do not use more than 1 tsp. of
bleach per gallon of water to avoid damaging your humidifier.
3. Please make sure the sealing ring on the tank cap is installed properly after cleaning to
avoid water leakage.
1
2
Scale Removal Instructions
10
09