background image

22 

5.3.4 OSD Display 

1.

 

Choose the desired options with the 

/

/

/

 

button. 

2.

 

Press the 

 

button to save your setting and exit 

the dialog. 

 
 
 
 
 
 

Š

 

Banner display time : Banner will remain onscreen for the selected time.(1~9 secs). 

Š

 

Screen Saver : The Screen Saver function protects when listening to a Radio channel.   

The following options can be selected.     
(Disable, 5, 10, 20, 30, 60 and 120 Minutes) 

Š

 

Radio Screen Saver : The Radio Screen Saver function protects when listening to a Radio   

channel. The following options can be selected.     

  (Disable, 10 seconds to 120 Minutes) 

Š

 

OSD Mixweight : Select the OSD transparency level. (Low, Middle, High). 

Š

 

Teletext Mixweight : Select the Teletext transparency level. (Low, Middle, High). 

Š

 

VFD Display : Select VFD display mode (Channel  Name or Channel Name) 

 

5.4 Channel 

5.4.1 Record List 

Please see section, 7.5 Recording List.   
 

5.4.2 Delete   

1.

 

You can delete channels by “mode” (channel / 
favourite) and by “option” (TV, Radio etc.). Select 
the delete mode or option with the 

/

/

/

 

buttons. 

2.

 

Press the 

OK 

button to make the deletion, and 

exit the dialog. 

 
 
 
 

Summary of Contents for HT9200DTR





















































Reviews: