7
HomeBraceGermany UG
(haftungsbeschränkt)
Konrad-Hornschuch-Str. 67 | Halle 24, C1 | 73660 Urbach
+49 7181 20741-0 | [email protected]
www.homebrace.com
14 Installation on the wheelchair
The eye gaze control system’s position on the wheelchair needs to be chosen properly to suit the user’s needs� For eye
gaze control of seating options such as changing the backrest position, the eye gaze control system needs to be mounted
on the back of the wheelchair� Ensure that the wheelchair has a dynamic length adjustment feature� This is essential in
order to make sure that the chair can be operated by the eyes in any wheelchair position�
The user needs to have the wheelchair display in sight� The best option is to mount a second display (e�g� Omni) at eye
gaze control level, which will allow the user to switch between modes with ease�
If you intend to set the seating positions directly via the eye gaze control system’s 4 option buttons, this second display is
not strictly necessary�
There is a risk that the user may go out of the eye gaze control
system’s scan range�
12 Contents of the pack
•
MyEcc Control
•
MyEcc Control software supplied as an executable app, no installation required, contained on a USB memory stick only
•
Connecting cable; 3 × jack cables, 9-pin D-sub cable, USB cable
•
HomeBrace bag
13 Wheelchair procedure
The power chair needs to be prepared for switch control by the installer (authorized specialists only!)� This step is not
included with MyEcc Control; please contact your contractual partner (system installer or manufacturer) for this purpose�
Interfaces may be:
•
Omni Display
•
IOM module
•
Switch interface
For the optimal use of the wheelchair with our MyEcc Control product group we recommend a corresponding driving stabi-
lity module of the wheelchair manufacturer�
!
There is a risk that the user may go out of the eye gaze control sys-
tem’s scan range�
