background image

5

HomeBrace Germany UG

 (haftungsbeschränkt)

Konrad-Hornschuch-Str. 67 | Halle 24, C1 | 73660 Urbach  
+49 7181 255700 | [email protected] 
www.homebrace.com

03 Important safety instructions 

Only experts authorized by HomeBrace Germany may perform assembly, startup and maintenance� This in particular 
means the individuals referred to in the following as “installers”; for further details, please consult item 13 of the operating 
manual� HomeBrace Germany will not be liable for any damage or loss resulting from unauthorized changes to the pro-
duct� HomeBrace Germany accepts no liability or warranty if MyEcc Pupil is combined with other brands, in particular any 
improper use of MyEcc Pupil with other devices�

Observe the maximum power supply your peripherals can use (USB port 5VDC; 100mA)� The use of the mounted modu-
le is permitted only by individuals with the appropriate mental capacity and cognitive function� Non-observance of this 
precaution may endanger the user or other people�
In addition, please observe the information for users in item 16�
HomeBrace Germany accepts no liability or warranty in the event of infringement�

MyEcc Pupil may be used outdoors but only in areas intended for pedestrians such as sidewalks, public places, pedest-
rian zones, etc� Participation in road traffic is not allowed� Ensure dustproof and splashproof assembly of the MyEcc Pupil 
Control control box� The assistance of an accompanying person and compliance with all safety instructions are mandatory� 
If the above criteria are not met or met only in part, outdoor use of MyEcc Pupil is strictly prohibited�

04 Maintenance and cleaning 

The product does not require regular maintenance� We recommend regular cleaning and disinfection with a disinfectant 
and cleaning agent intended for use in hospitals� The cleaning should only be done with a wipe� Wipe all exterior surfaces 
and allow to dry by itself�
For any repairs, consult an expert� If a malfunction occurs, send in your device to our after-sales service�

05 Mandatory review of the mounted system by 

the installer 

Suitable measures should be taken to check for and protect against crushing, impact, shearing and pinching� The following 
areas require special review and monitoring: 

• 

Check that the software feature to stop the wheelchair by closing the eyes is working properly (the software must 
self-deactivate)

• 

Speed

• 

Seating options and settings

• 

       Environmental hazard check!

!

Summary of Contents for MyEcc Pupil


















Reviews: