13
HomeBrace Germany UG
(haftungsbeschränkt)
Konrad-Hornschuch-Str. 67 | Halle 24, C1 | 73660 Urbach
+49 7181 255700 | [email protected]
www.homebrace.com
15-05 Parameter settings
The eccapp�ini file contains parameters to adjust the application’s appearance and behavior and
reflects the settings via the buttons� Some settings can only be adjusted directly in the file:
[GENERAL]
# ini file for eccapp_pupil c:Sägesser Engineering, Dottikon, CH
[PUPIL]
SAMPLES=6
Only adjustable here; describes the number of pictures (in this example, every
6th) used by the camera for control� Higher values give more precise controls
but also demand the most from the MyEcc Pupil Display�
LEFT=0
Camera position at left eye activated(=1) | deactivated (=0)
RIGHT=1
Camera position at right eye activated(=1) | deactivated (=0)
REVERSE=0
Changes the key command assignment to the mirror opposite, i�e� looking right
will move the wheelchair to the left, looking up will move it backward�
To activate, set the value from 0 to 1
[GENERAL]
SIZEX=691
Initial window size, horizontal (pixels)
SIZEY=636
Initial window size, vertical (pixels)
OFFSETX=400
Initial window position, horizontal (top left corner) on screen (pixels)
OFFSETY=112
Initial window position, vertical (top left corner) on screen (pixels)
TIMECALIBRATION=10000
Minimum time in milliseconds required for calibration
COUNTZEROFORRECALIBRATION=6
Calibration can be started by looking to the center and blinking a certain number
of times (6 in this case)
UNLOCKTIMEOUT=2500
Time for left-right-left activation
COUNTZEROLIMIT=10
Time until timeout if the eye is not detected
[RELAIS]
PULSELENGTH=30
Pulse length to activate drive and switch relays (ms)� This setting should not
need
to
be
changed�
PULSEINTERVAL=90
Pulse interval to activate drive and switch relays (ms)� This setting should not to
be
changed�
SWITCHMODE=2
Describes sw button setting
SWITCHWAITTIME=3000
SWITCHONTIME_F1=1000
SWITCHONTIME_F2=1000
SWITCHONTIME_F3=1000
SWITCHONTIME_F4=1000
[BUTTON]
Describes line values of each button
BUTTON1_Y_PERCENT=28
BUTTON2_X_PERCENT=38
BUTTON2_Y_PERCENT=32
BUTTON3_X_PERCENT=32
BUTTON4_X_PERCENT=38
BUTTON4_Y_PERCENT=39