6.
Connect the conduction pipe (9) to the humidifier disc (1).
7.
Assemble the ultrasonic evaporator in the order shown in Figure 2.
8.
Insert the bottom of the conduction tube into the cover of the ultrasonic evaporator.
9.
According to Figure 4., fill the water tank up with water. Use deionized water, which is not warmer
than 40 °C. Insert the water tank to the appliance.
10.
Insert 2 pcs AAA size batteries.
11.
The device now can be connected to the mains outlet.
CAUTION: RISK OF ELECTRIC SHOCK!
Do not attempt to disassemble o
r
modify the unit or its accessories. In case any part is damaged,
immediately power off the unit and seek the assistance of a specialist.
In the event that the power cable should become damaged, it should only be replaced by the
manufacturer, its service facility or similarly qualified personnel.
FEATURES
•
humidifier fan
•
all functions are remote controllable
•
adjustable fan in 3 stages
•
continuously adjustable humidification
•
natural wind
and night mode
•
oscillation (75°)
•
7,5 hour fan switch-off timer
•
humidification that can be switched on independently from the fan
FIGURE
1
:
•
1.
frontside of the guard grille with the humidifier disc
•
2.
blade fixer nut
•
3.
fan blade
•
4.
grille-fixer ring
•
5.
grille-fixer nut
•
6.
backside of
the guard grille
•
7.
motor
•
8.
head tilt angle adjustment
•
9.
conduction pipe
•
10.
appliance body
•
11.
push-buttons
•
12.
tubular frame
fixer screw
•
13.
power cable
•
14.
tubular frame
•
15.
base
•
16.
water tank
•
17.
humidifier power cord
•
18.
mist control
•
19.
ultrasonic
oscillator
•
20.
evaporator cover
FIGURE
3
.
Control panel:
•
21.
oscillation indicator
•
22.
humidification indicator
•
23.
switched-on state indicator
•
24.
push-buttons
•
25.
wind
operation modes
•
26.
fan speed
•
27.
switch-off timer indicator
Buttons of the remote control and the control panel:
•
SPEED /ON:
switch on, fan speed
•
MODE:
wind modes
•
TIMER:
switch-off timing
•
SWING:
oscillation switch
•
MIST:
humidification
switch on/off
•
OFF:
fan switch-off
FUNCTIONS OF THE DEVICE, USE
Connect the device to a standard 230 V~ / 50 Hz power outlet.
The POWER LED on the unit lights up.
Pressing the
SPEED/ON
button starts the fan at the lowest stage.
Fan mode also features
humidification, timing, oscillation
and also
wind function.
Use the
SPEED
button to select the fan speed.
Press
TIMER
button to select the period between 0,5 and 7,5 hours, after which the unit will switch off. The remaining time is the sum of
the periods indicated by the illuminated
LED
s.
Use the
MODE
button to select the natural wind mode (Nature), or the night mode (Sleep). For normal fan mode, press the MODE button
once again (Normal).
Use
SWING
button to switch on/off the right-left oscillating movement of the fan.
Use
MIST
button to start ultrasonic cold humidification.
Intensity can be set continuously adjusted with the mist control (18). Switched-on condition is indicated by the blue colored MIST LED. If
the water tank runs out of water, it is indicated by the red LED under the mist control (18), the function stops at the same time.
After switching it off with the remote control, all settings except the power off timer are memorized.
After a power failure, the unit forgets all previous settings and goes into standby mode.
CLEANING
In order to ensure optimum functioning, the unit may require cleaning at least once a month, depending on the manner of use and degree
of contamination.
1.
Prior to cleaning switch off and power off the unit by unplugging it from the electric outlet!
2.
Use a slightly moistened cloth to clean the unit's exterior. Do not use any aggressive cleaners. Avoid getting water inside of and on the
electric components of the appliance!
3.
Remove the water tank. By loosening the water outlet screw, empty the water from the device. Clean the inside of the device with a dry,
lint-free cloth.
4.
Reinstall the fan!