8
Important Safety Instructions
RELATED WARNINGS FOR USE
•
Do not arbitrarily disassemble or reconstruct the cooler, nor damage the refrigerant circuit;
maintenance of the appliance must be conducted by a specialist.
• Damaged power cord must be replaced by the manufacturer, its maintenance department or related
professionals in order to avoid danger.
• The gaps between cooler door and cooler body are small, be noted not to put your hand in these
areas to prevent from squeezing the finger. Please be gentle when close or open the cooler door to
avoid falling articles.
RELATED WARNINGS FOR USE
•
Do not give package and other components to children to play. The bending board and plastic film
may lead to suffocation! Do not allow children to enter or climb the cooler to prevent that children
are sealed in the cooler or children are injured by the falling cooler.
•
Do not spray or wash the cooler; do not put the cooler in moist places easy to be splashed with
water so as not to affect the electrical insulation properties of the cooler.
• Do not use cooler body, cooler door, etc. as pedal or support.
• Do not place heavy objects on the top of the cooler considering that objects may fall when open or
close the door, and accidental injuries might be caused.
• Please pull out of the plug in case of power failure or cleaning. Do not connect the cooler to power
supply within five minutes to prevent
damages to the compressor due to successive starts
.
WARNINGS RELATED TO PLACING ITEMS
•
Do not put flammable, explosive, volatile and highly corrosive items in the cooler to prevent damages
to the product or fire accidents.
•
Do not place flammable items near the cooler to avoid fires.
• This product is household cooler and this equipment can only be used for the storage of wine.
According to the standard requirements, household cooler shall not be used for other purposes, such
as storage of blood, drugs or biological products.
WARNINGS FOR ENERGY
1. Cooler might not operate consistently when sited for an extended period of time below the cold end
of the range of temperatures for which the cooler appliance is designed.
2. The need to not exceed the storage time(s) recommended by the wine manufacturers for any kind of wine.
3. The precautions necessary lo prevent an undue rise in the temperature of the wine while defrosting
the cooler.
4. The fact that a rise in temperature of the wine during manual defrosting, maintenance or cleaning
could shorten the storage life.
5.
The necessity that, for doors or lids fitted with locks and keys, the keys be kept out of the reach of children
and not in the vicinity of the cooler appliance, in order to prevent children from being locking inside.