16
Cleaning and Maintenance
If the cooler left unused for a long time, please:
1.
Unplug the cooler;
2.
Clean the cooler;
3. Keep the cooler door open.
CLEAN THE COOLER
• Please turn off the power before cleaning, remove drinks or shelves, etc.
• Dust behind the cooler and on the ground shall be cleaned regularly to ensure the cooling and
energy saving effect.
• Check the door gasket regularly to make sure there is no debris. Clean the door gasket with a soft
cloth dampened with soapy water or diluted detergent.
• The interior of the cooler should be cleaned regularly to avoid odor.
• Use a soft cloth or sponge to clean the inside of the cooler, with two tablespoons of baking soda and
a quart of warm water. Then rinse with water and dry with a soft cloth. After cleaning, open the door
and let it dry naturally before turning on the power.
•
For areas that are difficult to clean in the cooler (such as narrow sandwiches, gaps or corners), it is
recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined
with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacteria accumulation in
these areas.
• Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the
interior of the cooler or contaminate food.
• Clean the shelves with a soft cloth dampened with soapy water or diluted detergent. Then rinse with
water and dry with a soft cloth or dry naturally.
• The wooden wine rack should not be directly immersed in liquid to prevent cracking or mold after
moisture. The wooden wine rack should be cleaned with a dry soft cloth. The heavily contaminated
wooden wine rack should be cleaned with a soft cloth that has been wrung out, and dry naturally.
• Wipe the outer surface of the cooler with a soft cloth dampened with soap water, detergent, etc.,
and then wipe dry. Do not rub or scratch the surface of the glass door to prevent the door from
being broken or scratched.
• Do not use hard brushes, clean steel balls, wire brushes, abrasives(such as toothpaste), organic
solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which may
damage the cooler surface and interior. Boiling water and organic solvents such as benzene may
deform or damage plastic parts.
• Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect
electrical insulation after immersion. Water should not soak the operating control elements and
lighting system on the glass door.
NOTE:
Do not use detergent and solvent with sand or acid to clean the cooler.