12
Operating Instructions
PLACEMENT
• Before using the cooler, remove all packaging
materials including bottom cushions and foam pads
and tapes inside the cooler, tear off the protective film
on the door and the cooler body.
• Avoid direct sunlight and heat sources such as stove,
heating radiator, etc.
•
The cooler is placed in a well ventilated indoor place;
the ground shall be flat and sturdy (rotate left or
right to adjust the feet for levelling if unstable).
•
The height of the cooler is adjustable (34 1/8”-35”
(867-890mm).
START TO USE
•
The cooler shall stay for 24 hours before connecting to power in the first use.
•
Clean up the inner chamber before use for first time.
• Do not connect cooler to electronic energy saving plug and a converter that can convert DC into AC
(E.g.: solar energy system, ship grid).
• Water drop or frost will be generated on the back side of cooler when compressor is running. Wiping
out frost or water drop is not necessary. The defrosted water will be collected into drain tank, then
flows into water disposal pan above the compressor.
HANDLE INSTALLATION
Please choose the following handle installation instruction according to your actual needs.
1. Put the handle on glass door through the two bolts.