(888) 782-5618
1.
To prolong the original appearance, clean with clear water and a soft, damp cloth only.
2.
Do not use paints, solvents, or other chemicals on this light fixture. They could cause a premature deterioration of the finish. This
is not a defect in the finish and will not be covered by the warranty.
3.
Do not spray with a hose or power washer.
CLEANING AND MAINTENANCE
LED Motion Activated Security Light
Model No. ES00735V
s e c u r i t y
www.homezonesecurity.com
3. Loosen the clamp screw in the sensor ball joint and gently rotate the sensor. (Figure 6)
4. Walk through the coverage area noting where you are when the lights turn on. Move the
sensor head up, down, or sideways to change the coverage area.
5. Adjust the RANGE as needed. RANGE set too high may increase false triggering.
(Figure 7)
6. Secure the sensor head by tightening the clamp screw. Do not overtighten the screw.
7. Set the amount of ON-TIME you want the lights to stay on after motion is detected (1, 5,
or 10 minutes).
Figure 7
Figure 6
