(888) 782-5618
1.
Use a damp cloth to clean the solar panel
2.
To avoid any damage to this light, please do not use any chemical or abrasive cleaner
HOW TO OPERATE AND INSTALL
HOW IT WORKS
CLEANING AND MAINTENANCE
Figure 1
This product contains (2) 1.2V AA 1800mAH Ni-MH rechargeable batteries. When
the batteiesy expire, these must be recycled or disposed of properly. Please
contact your local waste disposal authority for correct procedure.
Do not put battery into fire
Do not mix old and new batteries.
Do not mix Alkaline and Carbon batteries
1.
Remove the Solar Panel Unit from Plastic lens.
2.
Open the battery chamber covers.
3.
Replace the old batteries with new batteries making sure the polarity is correct.
4.
Place back the battery chamber covers.
Battery replacement
RECHARGEABLE BATTERY
• Remove the Solar Panel Unit (Part A) from Plastic lens (Part B)
• Slide on the switch to your desired position which is on the bottom of the Solar
Panel Unit (Part A )
- High: 60lumens brightness
- Low: 30lumens brightness
• Replace the Solar Panel Unit accordingly.
Figure 2
• Put the Lamp head (Part A & B), Poles (Part D), and Connectors (Part C) together.
• Choose desired ground location. Drill two holes on the ground. Insert the Plastic
Anchors (Part G) and put the Base (Part E) to align the holes. Screw the Screws
(Part F) to fix the base.
• Put the assembly part onto the base.
Note: Install light in location where it can receive a full 8 hours of sunlight to allow
the rechargeable battery to reach maximum capacity
Note: Lights with solar panel may have a protective film over the solar panel. This
must be removed prior to use.
s e c u r i t y
www.homezonesecurity.com
Model No. ELI0993V
Solar Lamp Post
Figure 1
Figure 2
Solar panel collects sunlight to
charge the battery (included)
during the day
Automatically turns on at dusk for
up to 8 hours of nighttime
illumination
