HOME REFINEMENTS JULIEN HR-ELGG32-P, Installation And Maintenance Manual

Page: 79 / 96

79
INSTALLATION REQUIREMENT
TOOLS AND PARTS
Gather the required tools and parts before starting installation. Read and follow the instructions provided with
any tools listed here.
Tools Needed
• Measuring tape
• Pipe wrench
• Small, flat head screwdriver
• Non-corrosive leak-detection solution/soap
Parts Supplied
• Gas pressure regulator/hose assembly
• One (1) ’AA” size battery
• Hardware packet
LOCATION REQUIREMENTS
WARNING
• Explosion Hazard
• Do not store the fuel tank in a garage or indoors.
• Do not store the grill with a fuel tank in a garage or indoors.
• Failure to follow these instructions can result in death, explosion, or fire.
WARNING
• Fire Hazard
• Do not use the grill near combustible materials.
• Do not store combustible materials near the grill. Failure to follow these instructions can result in death,
explosion, or fire.
• Select a location protected from the wind and strong draft areas and far from traffic paths. Do not obstruct
the flow of combustion and ventilation air. The clearance from combustible material is:
• A minimum of 36’’ (914 mm) must be maintained between the front of the grill’s hood, sides and
back of the grill and any combustible construction.
• A 36’’ (914 mm) minimum clearance must also be maintained between the cooking surface underside
and any combustible construction.
• See the ‘’Assistance or Service’’ section to order.
• Scissors to remove tie downs
• #2 and #3 Phillips screwdriver
• Level
• Wrench or pliers