Home Depot FC132-BJRL Use And Care Manual Download Page 3

3

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Warranty

Pre-Installation

SPECIFICATIONS

Size

Speed

Volts

Net

Weight

Gross

Weight

Cube Feet

52”

1

2

3

120

0.06

0.08

0.11

3.00

4.30

6.50

17.62 Ib
(8.0 kg)

22.03 Ib
(10.0 kg)

4

5

6

Size

Speed

Volts

Amps

Watts

RPM

CFM

Amps

Watts

RPM

CFM

Net

Weight

Gross

Weight

Cube Feet

56”

1

2

3

120

0.07

0.10

0.15

0.29

0.49

0.61

3.40

5.40

9.40

19.2

35.7

44.6

4

5

6

0.48

0.35

0.21

34.2

23.5

13.2

60

 80

100

180

160

130

60

 80

100

180

160

130

1930

2420

2900

2.74 cu.ft.

17.62 Ib
(8.0 kg)

22.03 Ib
(10.0 kg)

2.74 cu.ft.

5430

4990

4230

2500

2980

3580

7100

6320

5360

NOTE: These are approximate measures. They do not
include the Amps and Wattage used by the light kit.

The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a period 
of lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic 
blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of 
purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model 
if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and 
reinstalling the product are your responsibility. Damage to any part such as by accident or misuse or improper installation or by afxing any 
accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass nish, 
including rusting, pitting, corroding, tarnishing, or peeling. Brass nishes of this type give their longest useful life when protected from varying 
weather conditions. A certain amount of “wobble” is normal and should not be considered a defect. Servicing performed by unauthorized persons 
shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby disclaims any and all warranties, including but not 
limited to those of merchantability and tness for a particular purpose to the extent permitted by law. The duration of any implied warranty which 
cannot be disclaimed is limited to the time period as specied in the express warranty. Some states do not allow a limitation on how long an implied 
warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages 
arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the 
exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specic legal 
rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any 
return of product as part of a claim on the warranty must be paid by the customer.
Contact the Customer Service Team at 1-877-527-0313 or visit www.hamptonbay.com

Item # 1000*****/1000***** 
Item # FC132-BJRL/FC140-BJRL 

Summary of Contents for FC132-BJRL

















Reviews: