Assembly -Hanging the Fan (continued)
10
Mounting the fan-motor assembly
(standard mount)
7
□
Gently wrap the excess wire around the mounting bracket.
□
Secure with electrical tape.
Wrapping the extra wire
6
WARNING: When using the standard ball/downrod mounting, the tab in the
ring at the bottom of the mounting bracket must rest in the groove of the
hanger ball. Failure to properly seat the tab in the groove could cause damage
to the wiring.
NOTEFollow this step ONLY if you did not cut the extra length off from the
wires coming from the ceiling fan.
Item # 1000*****/1000*****
Item # FC132-BJRL/FC140-BJRL
□
□
Firmly tighten the two screws (KK).
□
Align the locking slots of the canopy with two screws (KK) in the
mounting bracket (A). Push up to engage the slots and turn
clockwise to lock in place.
Install the decorative bottom cover (D) by aligning the cover’s slots
with the screws in the bottom of the canopy (C). Rotate the bottom
cover clockwise to lock in place.
