Maintenance & Cleaning
Settings
Screen Filter Cleaning
Close the water valve.
Disconnect the water supply hose. Take the
screen filter out and clean it with a soft brush.
Return the filter after cleaning and reconnect
the water supply hose.
Open the water valve.
When bidet seat is not used for an extended period
of time, unplug and drain the unit.
Extended Non-Use
Exterior surface of unit is made of plastic
material, which may be damaged by scrubber,
chemicals, etc.
Wipe the surface with a soft damp cloth.
Do not spray water directly onto the surface.
Be careful of not dropping any chemical detergents
or toilet cleaner the main body or supply hose to
avoid damage.
Clean the body after removing the power plug
from the outlet. Be sure no water splashes into
the power plug or outlet.
Seat Cleaning
Remove the power plug from the outlet.
Close the water feed valve.
Press the release button and gently pull to remove
the unit from the catch plate.
Use a screwdriver or coin to open the drain plug.
Draining of Tank Water
Silent mode
“ ” for longer than
3 seconds.
Power off
To turn on/off the operating
chime sound.
ON
ON
OFF
Press one of Stop, Wash, Bidet,
Intensive or Dry to power on.
Seat sensor feature will be
deactivated.
To turn on/off the night light.
* The unit will work without sitting on the seat if the occupied seat sensor is deactivated. (turned off)
* If the seat sensor is deactivated, some features cannot be controlled.
(Night light on/off, silent mode on/off, and nozzle cleaning)
“ ” for longer than
3 seconds.
“ ” for longer than
3 seconds.
“ ” for longer than
3 seconds.
Seat sensor
bypass
Night light
: Seat sensor ‘on’
: Seat sensor ‘off’
: Regardless of on/off
No
Function
Switch operation
Description
Initial
status
Seat
status
ON
After 3 seconds, the seat will
power off. Keep holding another
2 seconds and the seat will power
back on. This completes the factory
reset process.
Press and hold the Stop
button for 5 seconds.
Factory reset
Automatic tank draining feature
will be activated
Automatic
tank draining
“ ” + “ ”
for longer than 3 seconds
Stop
OFF
Stop
Water
Temp
Pulse