background image

 

HOMEDEPOT.COM/HOMEDECORATORS 

 

 

Please contact 1-800-986-3460 for further assistance. 

 

Operation (continued) 

Using the main power button 

□ 

Press the power button (6) to turn the fireplace/heater unit on and off. Press the power button (6) once to turn the unit on. Press again 

to turn the unit off.  

 

 
 
 

Using the Remote Control   

 

Installing the battery 

For replacement batteries, use AAA batteries. 

□ 

Press down and slide back cover off the battery compartment. 

□ 

Insert two provided AAA batteries into the battery 
compartment making sure that the ends of the batteries with 

the negative (-) symbols are against the springs in the 

battery compartment. 

□ 

Replace the battery compartment cover, making sure it 

snaps into position. 

 
 
 

□ 

Turn the remote over and aim it towards the fireplace/heater unit. 

□ 

Press the power button on the upper left, and see if the flames on the fireplace/heater turn on or off. 

□ 

If nothing appears to happen, check to make sure the battery is installed correctly, and try again. 

 

Battery Replacement

 

NOTE:

 

Do not mix old and new batteries. 

             Do not mix alkaline, standard (carbon zinc), or rechargeable (nicad, nimh, etc.) batteries. 
 

 

 

 
 

 

 

 
 

 

 

 

 

WARNING:

 Do not ingest batteries. 

1.

 

Non-rechargeable batteries are not to be recharged. 

2.

 

Batteries are to be inserted with the correct polarity. 

3.

 

Exhausted batteries are to be removed from the product. 

4.

 

Always purchase the correct size and grade of battery most suitable for the intended use. 

5.

 

Replace all batteries of a set at the same time. 

6.

 

Clean the battery contacts and also those of the device prior to battery installation. 

7.

 

Remove batteries from equipment with is not to be used for an extended period of time. 

NOTE:  

Battery disposal 

Please always dispose of batteries  

at a suitable recycling point. 

OPEN

 

CLOSE

 

6

Summary of Contents for SF122-26AI











Reviews: