background image

Shelf Weight Capacity

15 lbs (6.8kg)

16

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

NOTE:

FCC Information

70 lbs (32kg)

40 lbs (18.1kg)

30 lbs (13.6kg)

Warning: 

Changes or modifications to this unit not expressly

approved by the party responsible for compliance could void the

user's authority to operate the equipment.

CAUTION: This cart (or stand) is intended for use only with the

maximum weights indicated. Use with products heavier than the
maximum weights indicated may result in instability causing
possible injury.

Summary of Contents for 765477




















Reviews: