www.homedepot.com/homedecorators
Please contact 1-800-986-3460 for further assistance.
1
Mounting the hardware
Thread the fixture screws (FF) into the
provided holes of the mounting bracket
(GG).
Thread the hex nuts (BB) onto the fixture
screws (FF). Do not tighten the hex nuts
(BB) at this time.
Pull the supply wires out from the outlet
box and mount the mounting bracket (GG)
to the outlet box using the bracket
mounting screws (EE).
Place the fixture pan (A) over the outlet
box and onto the fixture screws (FF).
Adjust the fixture screws (FF) until it
protrude out from the fixture pan (A) 1/4 in.
Remove the fixture pan (A) and secure the
position of the fixture screws (FF) by
tightening the hex nut (BB) against the
mounting bracket (GG).
2
Connecting the wires
Connect the black supply wire to the black
fixture wire using a wire nut (DD).
Connect the white supply wire to the white
fixture wire using a wire nut (DD).
Connect the fixture ground wire to the
supply ground wire using a wire nut (DD).
Wrap all wire connections with electrical
tape for a more secure connection.
Carefully tuck the wires and wire nuts (DD)
into the outlet box.
Installation
5
NOTE:
If you have electrical questions consult
your local electrical code for approved
grounding methods.
EE
FF
BB
GG
DD
GG
FF
BB
A
