10
Assembly (continued)
11
Attaching the back panels
□
Locate the back panels (D & N) and line them up to the back
of the media console with the finished side facing in.
□
Insert and tighten twenty-eight screws (FF) to attach the
back panels (D & N) to the media console.
□
Do not strip the screws (FF) by overtightening.
FF
D
N
N
12
Attaching the doors and knobs
□
Loosen the screws in the hinge plates (GG) in the left and
right side panels (E & F).
□
Line up the hinges in the left and right doors (H) with the
hinge plates (GG) in the left and right side panels
(E & F).
□
Tighten the screws to attach the hinges to the hinge plates
(GG) on the left and right side panels (E & F). Do not strip
the screws by overtightening.
□
Attach knobs (EE) to the left and right doors (H) by inserting
the bolts through the doors (H) and turning clockwise into
the knobs (EE). Do not strip the bolts by overtightening
EE
GG
E
F
H
H
NOTE:
The door’s left/right and forward/back,
positions are adjusted by turning the screws in the
hinge pivot as shown in the illustration.
