Pre-assembly - Wind guard
PACKAGE CONTENTS
Part
Description
Quantity
A
Long panel
2
B
Short panel
2
A
B
B
A
4
Assembly
1
You will assemble the wind guard upside down. It is
recommended to complete assembly on a soft surface
such as a towel or blanket.
□
Loosen the set-screws in each bracket (AA) to allow the
glass panels (A and B) to slide smoothly into the
brackets.
□
Verify that a small silicone pad is in place at the tip of
each bracket set-screw. Do NOT tighten the screw
directly to the glass if the pad is missing. Check the
product packaging or contact Customer Service.
□
Slide a long panel (A) and a short panel (B) into one
bracket as shown.
□
Align the bracket near the lower edges of each glass
panel (A and B).
□
Gently tighten the bracket set screws until the panels
are held in place. Do not fully tighten bracket set
screws until all glass panels and brackets are in place.
A
AA
B
Joining the first two panels
