![Home Decorators Collection 1007465673 Use And Care Manual Download Page 11](http://html.mh-extra.com/html/home-decorators-collection/1007465673/1007465673_use-and-care-manual_2150110011.webp)
Assembly - Tank housing
1
2
Attaching the second side panel
□
Place the base (D) on a level surface.
□
Align the first side panel with hand gap (B) vertically
along one side of the base as shown.
□
Place a washer (BB) on each of two bolts (AA), then
insert the bolts through the holes in the bottom edge
of the side panel (B) and into the base (D).
□
Gently finger-tighten the bolts (AA), but do not fully
tighten to allow for adjustments as you continue
assembly.
Attaching the first side panel
□
Align the second side panel with hand gap (B)
vertically opposite the previously attached side
panel, as shown.
□
Place a washer (BB) on each of two bolts (AA), then
insert the bolts through the holes in the bottom edge
of the side panel (B) and into the base (D).
□
Gently finger-tighten the bolts (AA), but do not fully
tighten to allow for adjustments as you continue
assembly.
3
Attaching the solid side panels
□
Align the first solid side panel (C) vertically between the two
installed panels, as shown.
□
Place a washer (BB) on each of two bolts (A), then insert the
bolts through the holes in the bottom edge of the solid side
panel (C) and into the base (D).
□
Place a washer (BB) on each of four bolts (AA), then insert the
bolts through the holes in the vertical edges of the solid side
panel (C) and into the adjoining side panels (B).
□
Repeat the above steps to install the final solid side panel (C).
□
After all four side panels (B and C) are installed, fully tighten all
bolts (AA) using a Phillips screwdriver or an adjustable wrench.
Do not overtighten hardware to avoid stripping threads.
B
AA
BB
AA
BB
B
D
D
AA
BB
C
B
10