5
Installation
1
2
3
Installing the backplate
Making the electrical connections
Fasten the open end of the ground wire (bare
copper or green wire) to the ground wire from
the junction box or the ground screw (CC) on
the backplate (EE).
Connect the black wire of the power supply to
white wire of the power supply to the white
NOTE:
Always use the wire nuts (AA) to connect wires and
push all excess wires and connections back into the junction
box
(not included).
(D). Using the backplate (EE) as a guide, mark
on the wall with the outlet box (not included)
the locations for anchors (GG) with a pencil (not
included). Drill a 1/4 in. hole at marks, then
insert anchors (GG). Secure the backplate (EE) to
the outlet box with the outlet box screws (BB).
Align the keyholes in the backplate (EE) with the
anchors (GG) and insert the tapping screws (FF).
on a clean surface.
WARNING:
Turn off power at the main fuse box.
Carefully unpack the fixture. Lay out all the parts
Remove the backplate (EE) from the fixture body
the black wire of the fixture and connect the
wire of the fixture.
Attach the fixture body (D) to the
Installing the fixture body
backplate (EE). Then tighten the
mounting screws (DD) by using a
phillips screwdriver (not included).
WHITE WIRE
WHITE WIRE
FROM FIXTURE
FROM FIXTURE
FROM CANOPY
GROUND WIRE
BLACK WIRE
BLACK WIRE
GROUND WIRE
FROM HOUSE
FROM HOUSE
FROM HOUSE
EE
GG
BB
FF
EE
CC
AA
EE
D
DD
WWW.HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
