ASSEMBLY
1 Assembling the Legs and Tail to the Body
Insert the metal rods attached to each Leg (E&F) into the
connecting holes on the under side of the Body (D). Fasten together over
the metal frame with the Plastic Ties (I). Insert the connecting rod on the
Tail (G) into the connecting hole on the rear of the Body.
2 Assembling the Antlers and Ears to top of the Head
Insert the connecting rods on both the Antlers and the Ears (A & C) into the
connecting holes at the top of Head/Neck (B). Insert the connecting rods
on the bottom of the Head/Neck (B) into the connecting holes on the front
of the Body (D) and fasten together over the metal frame with the Plastic
Tie (I).
3 Securing the Deer to the Ground
Secure the Deer to the ground with the Ground Stakes (H) by placing a
Ground Stake through each Leg and over the metal frame then into the
ground.
