background image

Care and Cleaning

Troubleshooting

MADE IN CHINA 

 PRINTED IN CHINA

DISTRIBUTED BY:

HOME DEPOT

2455 PACES FERRY RD., N.W.

ATLANTA, GA 30339

FOR ASSISTANCE, CALL:

1-877-527-0313

HOMEACCENTSHOLIDAY.COM

a.  Wipe the unit with a damp cloth and allow the unit to dry 

before storing. If necessary, you can use a mild detergent.

b.  When the product is placed on a live tree, the tree should 

be well maintained and fresh. Do not place on live trees in 

which the needles are brown or break off easily. Keep the 

tree holder filled with water.

c.  If the product is placed on a tree, the tree should be well 

secured and stable.

d.  Before using and reusing, inspect the product carefully. 

Discard any products that have cut, damaged or frayed wire 

insulation cords, cracks, lamp holders or enclosures, loose 

connections, or exposed copper wire.

e.  When storing the product, carefully remove the product from 

wherever it is placed, including trees, branches, or bushes, to 

avoid any undue strain or stress on the product conductors, 

connections and wires.

f.   When not in use, store neatly in a cool, dry location protected 

from sunlight.

To reduce the risk of fire and electric shock:

1.  Do not install on trees having needles, leaves or branch 

coverings of metal or materials which look like metal.

2.  Do not mount or support wires in a manner that can cut or 

damage wire insulation.

Problem: The unit is not inflating.

a. Ensure that the unit is plugged in.

b. Check for and remove any debris from the motor.

c. Ensure that the zipper on the unit is completely closed.

d.  If the outdoor temperature is below 14° F (-10° C), the motor 

does not work until the outdoor temperature increases.

Problem: The unit is torn.

a.  You can hand sew tears with any type of thread or use clear 

packing tape to cover the tear.

Problem: The unit deflates after unplug. 

a.   The unit will not stay inflated unless it is plugged in and the 

fan is blowing air. 

Problem: I have stored my Airblown

®

 Inflatable for several 

months and now the motor does not work.

a.  Sometimes the air intake may be blocked by loose grass/

leaves or other particles. Gently shake, knock or tap the 

motor and see if it will operate again.  

Model #: 

 

227192

WARNING:

 This device complies with Part 15 of the 

FCC Rules. Operation is subject to the following two conditions: 

(1) this device may not cause harmful interference, and (2) 

this device must accept any interference received, including 

interference that may cause undesired operation.

CAUTION: 

Changes or modifications not expressly 

approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

NOTE: 

This equipment has been tested and found to 

comply with the limits for a Class B digital device, pursuant 

to Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference 

in a residential installation. This equipment generates, uses, 

and can radiate radio frequency energy and, if not installed 

and Used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there 

is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to 

try to correct the interference by one or more of the following 

measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician for 

help.

Reviews: