Assembly Instructions
Ensure the four clips on the bottom
of the fabric of the inflatable (A) are
attached to the plastic legs on the
base of the intlatable.
Ensure that the air intake on the
inflatable (A) unit is clear of fabric and
other obstructions and that the zipper
is fully closed. Some inflatables have
more than one zipper.
Turn the inflatable (A) upright and insert
four base stakes (B) through the holes
of the plastic legs into the ground.
Plug in the inflatable (A) into an outlet
or other power source to inflate.
Once fully inflated, clip the nylon tethers
(C) to each of the attached nylon loops
on the side of the inflatable (A).
Using the loop at the end of the tether
(C), attach it to the tether stakes(D).
Drive the stakes (D) into ground at a
45-degree angle.
1
For maximum stability bring tether down
to a 45-degree angle from the inflatable
as shown in the illustration. In order to
achieve this you may need to wrap the
excess tether around the top of the stake.
Do’s and Don’ts
1. Do check your inflatable daily and adjust
to stand up straight.
2. Do not attempt to operate your inflatable
in unusually strong winds.(see caution)
2
3
4
5
6
7
8
9
A
A
A
A
B
C
A
D
45°
D
C
Package Contents
Part
Description
Quantity
A
Inflatable unit
1
B
Base stakes
4
C
Tethers
3
D
Tethers stakes
3
E
Spare fuse
1
