ASSEMBLY
1 Assembling the Base Stand to the Lower Body
Insert the connecting rod on the Base Stand (F) into the connecting
hole at the bottom of the Lower Body (C) then secure together at the
connecting loops with the Bolt & Wingnut (L).
2 Assembling the Wings and Arms/Hands to the Upper Body
Insert the connecting rods on each Wing (D) and Arms/Hands (E) into the
connecting holes of the Upper Body (B) and fasten at the connecting loops
with Plastic Ties (I).
3 Assembling the Upper Body to the Lower Half of Body
Insert the connecting rod on the bottom of the Upper Body (B) into the
connecting holes on the top of the Lower Body (C) then secure together
at the connecting loops with the Bolt & Wingnut (L).
4 Assembling the Halo/Head to the Upper Body
Insert the connecting rods on Halo/Head (A) into the connecting holes on
the top of the Upper Body (B) and fasten at the connecting loops with
Plastic Ties (I).
5 Assembling the Ground Stakes
Insert Ground Stakes (K) over the metal frame of each corner of the
Base Stand then into the ground firmly.
6 Assembling the Anchoring Strings
Hook the plastic clipped end of each of Anchoring String (J) onto the metal
loop on the Wings (D) (see diagram below). Attach the looped end of the
Anchoring String to the top of the Ground Stakes (K). Pull the Anchoring
String with Stake tightly out and away from the Angel evenly at 4 corners
then insert the Stake firmly into the ground.
C
F
L
I
D
B
E
L
B
C
B
A
I
K
K
J
D
