•
LUBRICATION:
It is a correct lubrication of the treadmill with silicon oil or teflon is really
important. This lubrication must be performed regularly. Depending on its use even before
the first use. There is a hole for adding oil on motor cover. After starting machine, please
change to highest speed, then add the oil into the hole, the oil will be spread from the
middle between the running belt and board.
•
ALIGN THE BELT:
Due to its use, the belt can move off center. If
the belt has moved to the left, start treadmill, and increase the
speed to 3MPH. Use the 5mm Wrench to turn the fixed left bolt
clockwise or turn the fixed right bolt counterclockwise. Do not tight-
en the belt too much in order to be able to walk. Repeat this proce-
dure until the belt is properly aligned.
•
ALIGN AND TIGHTEN THE BELT OF THE TREADMILL
< 3 hours/week
2 months
4 – 7 hours/week
1 month
> 8 hours/week
15 days
If deviate to the left, then adjust the screw on the
left side clockwise or the screw on the right side
anticlockwise.
If deviate to the right, then adjust the screw on the
right side clockwise or the screw on the left side
anticlockwise.
31
Summary of Contents for A90-284V90
Page 23: ...II MAIN TECHNICAL FEATURES 23 ...
Page 28: ...MANUAL MODE PROGRAM 28 ...
Page 35: ......
