HOMCOM 820-340V80, Instruction Manual

Page: 3 / 10

3
17. Use only for intended household use as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or injury to
persons. The use of attachments not recommended or sold by unauthorized
dealers may cause hazards.
18. Always use on a dry, level surface. Use on floor only.
19. DO NOT use outdoors.
20. WARNING: To reduce the risk of fire or electric shock, DO NOT use this unit with
any solid-state speed control device.
21. DO NOT attempt to repair or adjust any electrical or mechanical functions on this
unit. Doing so will void your warranty. The inside of the unit contains no user
serviceable parts. Qualified personnel should perform all servicing only.
22. Always use the product in an upright position.
SAVE THESE INSTRUCTIONS
OVERHEAT SAFETY FEATURE
This heater is equipped with an overheat safety feature. When the heaters internal
components reach a certain temperature that could cause overheat and possible fire,
the heater will automatically shut off.
1. A thermal overload protector is built in to prevent over- heating. When an
“overheat” temperature is reached, the heater will automatically shut off. Operation
can resume only when the user resets the unit.
2. To reset the unit, unplug the heater, ensure the power is turned off, and wait 15 to
20 minutes for the unit to cool down.
3. Follow INSTRUCTIONS FOR USE to return heater to operating mode.
THIS APPLIANCE HAS A POLARIZED PLUG (one blade is
wider than the other). To reduce the risk of electric shock, this
plug is intended to fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper
outlet.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT
THIS SAFETY FEATURE IN ANY WAY.
WARNING:
It is normal for the power cord to feel warm to the touch; however, a loose fit between the
outlet and the plug may cause overheating of the plug. If this occurs, try inserting the plug
into a different outlet. Contact a qualified electrician to inspect the original outlet for
damage.
Fig.1
INSTRUCTIONS FOR ASSEMBLY
1. Place the product on a padded surface with underside
accessible.
2. Attach leg to stove by inserting tab on the top of the leg
into the corresponding slat at the bottom of the stove.
3. Insert 3 screws into predrilled holes and tighten
securely. Fig.1
4. Repeat with remaining three legs.