background image

~ 1 ~

 

  Safety Information 

 

Before placing your new appliance into operation please read these operating instructions carefully. They 
contain important information for safe use, for installation and for care of the appliance.  

Please keep these operating instructions for future reference. Pass them on to possible new owners of the 
appliance. 

 

This appliance is not intended for use by persons (including children) with reduced physical, sensory or lack 
of experience and knowledge unless they have been given supervision or instruction concerning use of the 
appliance by a person responsible for their safety. Children should be supervised to ensure that they do not 
play with the appliance.  

Children should not be allowed to carry out any cleaning or maintenance unless they are supervised.  

Keep packaging material out of the reach of children! It can become a choking or suffocation hazard. 

If you are discarding the appliance, ensure you cut the power connection cable (as close to the appliance as 
you can) and remove the door to prevent electrocution and from children locking accidently locking 
themselves in. 

 

General Safety and Precautions 

 

 

WARNING!  Place the appliance in a well-ventilated room, clear of obstruction 
 

 

WARNING! Do not use mechanical devised or other means to accelerate the defrosting process, 
other than those recommended by the manufacturer 

 

 
WARNING! Do not damage the refrigerant circuit. 

 

 
WARNING! Do not use other electrical appliances (such as ice cream makers) inside of refrigerating 
appliances unless they are approved for this purpose by the manufacture. 

 

 
WARNING! Any electrical components (plug, power cord, compressor etc.) must be replaced by a 
certified service agent or qualified service personnel. 

 

 
WARNING! The light bulb supplied with this appliance is a “special use bulb” intended only for use 
with the appliance and should not be used for domestic lighting. 
 

 

Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance. 

 

The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural 
gas with a high level of environmental compatibility, which is nevertheless flammable. 

 

During transportation and installation of the appliance, ensure none of the components of the 
refrigerant circuit are damaged. 

 

Summary of Contents for 800-073



















Reviews: