- 4 -
DRAWER AND BEARING REMOVAL:
To remove drawers and slides, pull drawer all the way out, depress the black drawer
release levers on each slide. For ball-bearing glides, there is one black lever per slide. One
black lever will be pushed down and the other will be pushed up for drawer removal. After
levers are pushed, the drawer is released. Pull out drawer all the way for removal. To re-
install the drawer, line up cabinet glides to drawer glides and squeeze glides inwards while
pushing in the drawer until each glide “clicks” into place.
After drawer removal, push up on the front of the ball-bearing drawer glide. After front of
glide is free from unit, pull the drawer glide slightly away from inner wall of cabinet. Gently
pull the ball-bearing glides straight out of unit for full removal.
MAINTENANCE
Ball-Bearing Slides
To maintain the smooth and quiet operation of the ball-bearing slides, lubricate the
extension track that houses the ball bearings every 3-6 months with a high quality jelly-like
petroleum based lubricant.
Powder Coat Finish
For heavy build-up of dirt and grime, our powder coat paint fi nish can be cleaned with
spray wax. Lightly spray the wax on the surface, and gently wipe with a soft, dry microfi ber
cloth. Window cleaner and a soft cloth dampened with water can be used to clean the fi nish
on a regular basis.
Customer Satisfaction
All mechanical parts are inspected and adjusted for proper use before shipment; how-
ever, mechanisms such as drawer slides and locks may shift during transit. Should any of
these items not operate correctly, please call customer assistance at 1-800-874-6625.
LEFT DRAWER RELEASE
LEVIER DE TIROIR GAUCHE
PALANCA DEL CAJÓN IZQUIERDO
LEFT DRAWER RELEASE
LEVIER DE TIROIR GAUCHE
PALANCA DEL CAJÓN IZQUIERDO
RIGHT DRAWER RELEASE
LEVIER DE TIROIR DROIT
PALANCA DEL CAJÓN DERECHO
RIGHT DRAWER RELEASE
LEVIER DE TIROIR DROIT
PALANCA DEL CAJÓN DERECHO
Front of Glide
Back End of Glide
Front Square
Mounting Bracket
Back Square
Mounting Bracket
1. Pull up
2. Pull away
3. Pull out
Drawer
Back Square
Mounting Hole
Outer Wall
Inner Wall
Front Square
Mounting Hole
BEARING REMOVAL:
Mounting Holes
BACK SIDE OF GLIDE
