Homa San.iQ cut V Original Instruction Manual Download Page 16

16 | EngliSH

In order to ensure that your guarantee claim is processed 
as efficiently as possible, please contact us or the appro-
priate sales representative. Once your claim for a return 
has been agreed, you will receive a return certificate. 
Please then send the rejected product, carriage prepaid, 
to the factory together with the return certificate, proof of 
purchase and an indication of the damage. Claims made 
on grounds of damage caused in transit must be estab-
lished and confirmed on delivery of the product by the 
express company, the railway company or the postal ser-
vice.

1.5.1. General information

This chapter contains the general information on the war-
ranty. Contractual agreements have the highest priority 
and are not superseded by the information in this chapter!

The manufacturer is obliged to correct any defects found 
in the products it sells, provided that the following require-
ments have been fulfilled:

• 

The defects are caused by the materials used or the 
way the product was manufactured or designed.

• 

The defects were reported in writing to the manufac-
turer within the agreed warranty period.

• 

The product was used only as prescribed.

• 

All safety and control devices were connected and 
inspected by authorized personnel.

If no other provisions have been made, the warranty pe-
riod applies to the first 12 months after initial start-up 
or to a max. of 24 months after the delivery date. Other 
agreements must be made in writing in the order confir-
mation. These agreements will remain valid at least until 
the agreed warranty period of the product has expired.

1.5.2. Spare parts, add-ons and conversions

Only original spare parts as supplied by the manufactur-
er may be used for repairs, replacements, add-ons and 
conversions. Only these parts guarantee a long working 
life and the highest level of safety. These parts have been 
specially designed for our products. Self-made add-ons 
and conversions or the use of non-original spare parts can 
seriously damage the product and/or injure personnel.

1.5.3. Maintenance

The prescribed maintenance and inspection work should 
be carried out regularly. This work may only be carried out 
by qualified, trained and authorized personnel. This ena-
bles you to monitor the status of inspections and main-
tenance work. Quick repairs not listed in this operation 
and maintenance manual and all types of repair work may 
only be performed by the manufacturer and its authorized 
service centres.

1.5.4. Damage to the product

Damage as well as malfunctions that endanger safety 
must be eliminated immediately by authorized personnel. 
The product should only be operated if it is in proper work-
ing order. During the agreed warranty period, the product 
may only be repaired by the manufacturer or an authorized 
service workshop! The manufacturer reserves the right to 
recall the damaged product to the factory for inspection!

1.5.5. Exclusion from liability

No liability will be assumed for product damage if one or 
more of the following points apply:

• 

Incorrect design and on our part due to faulty and/
or incorrect information provided by the operator or 
customer

• 

Non-compliance with the safety instructions, the reg-
ulations and the requirements set forth by German 
law and

• 

  this operating and maintenance manual

• 

Incorrect storage and transport

• 

Improper assembly/dismantling

• 

Improper maintenance

• 

Unqualified repairs

• 

Faulty construction site and/or construction work

• 

Chemical, electrochemical and electrical influences

• 

Wear

In case of a power failure or another technical failure, by 
which a proper operation of the pump is no longer guar-
anteed, it is essential to take care that damages by an 
overflow of the pump sump are prevented securely, for 
example, by installing a mains-independent alarm or other 
appropriate protective measures.
This means the manufacturer’s liability excludes all liability 
for personal, material or financial injury.

1.5.6. Manufacturer’s address

HOMA Pumpenfabrik GmbH
Industriestrasse 1
D-53819 Neunkirchen-Seelscheid
Phone:       +49 2247 / 7020
Fax:            +49 2247 / 70244
Email:         [email protected]
Homepage: www.homapumpen.de

Summary of Contents for San.iQ cut V

























































Reviews: