EngliSH | 15
1. General
1.1. Declaration of compliance
EC declaration of compliance according to the EC
Machinery Directive 2006/42 / EC, Annex II Part 1A
Manufacturer name and address:
HOMA Pumpenfabrik GmbH
Industriestrasse 1
53819 Neunkirchen - Seelscheid
We hereby declare that the machine
San.iQ cut V
follows relevant regulations:
Machinery Directive 2006/42/EC
Construction Products Regulations 305/2011/EG
Applied to harmonized standards, the references of which
have been published in the Official Journal of the EU:
DIN EN 12050-3
Wastewater lifting plants for buil-
dings and land drainage - construc-
tion and testing-
Part 3: Sewage disposal units for
limited use
Person responsible for compiling the technical file
Vassilios Petridis
Head of Development and Production
HOMA Pumpenfabrik GmbH
This EC Declaration of Conformity was issued:
Oberheister, 27/01/2020
Vassilios Petridis
Head of Development and Production
HOMA Pumpenfabrik GmbH
1.2. Preface
Dear Customer,
Thank you for choosing one of our company’s products.
You have purchased a product which has been manufac-
tured to the latest technical standards. Read this operat-
ing and maintenance manual carefully before you first use
it. This is the only way to ensure that the product is safely
and economically used.
The documentation contains all the necessary specifica-
tions for the product, allowing you to use it properly. In
addition, you will also find information on how to recog-
nize potential dangers, reduce repair costs and downtime,
and increase the reliability and working life of the product.
All safety requirements and specific manufacturer’s re-
quirements must be fulfilled before the product
is put into operation. This operating and maintenance
manual supplements any existing national regulations
on industrial safety and accident prevention. This manual
must also be accessible to personnel at all times and also
be made available where the product is used.
1.3. Proper use
The HOMA products comply with the valid safety regu-
lations and meet the demands of state-of-the-art tech-
nology. In the event of improper use, there is a danger
to life for the user as well as for third parties. Moreover,
the product and/or attachments may be damaged or de-
stroyed.
It is important to ensure that the product is only operated
in technically perfect condition and as intended.
To do so, follow the operating instructions.
1.4. Copyright
This operation and maintenance manual has been copy-
righted by the manufacturer. This operation and mainte-
nance handbook is intended for the use by assembly, op-
erating and maintenance personnel. It contains technical
specifications and diagrams which may not be reproduced
or distributed, either completely or in part, or used for any
other purpose without the expressed consent of the man-
ufacturer.
1.5. Warranty
Costs for removal and installation of the complained prod-
uct at the installation place, costs for the ride of the mech-
anicians to the location and from the installation place as
well as costs for transport are not components of our war-
ranty. Hereby arose costs, especially costs for checking
and transport are bearing by the sender or operator of the
pump. This is also valid for an asserted warranty claim if
a check results that the unit works faultless and is free of
defects. All products have a high quality standard. Each
product is defeated by a strict technical end control before
delivery. A warranty repair achieved by us does not extend
the warranty period. Replaced spare parts give no reasons
for a new warranty period. Extensive claims are excluded,
especially such as diminution, change or compensation
also for any kind of follow up damages.
Summary of Contents for San.iQ cut V
Page 50: ...50 Notizen Notes...