2
TKS Serie | Version 1.04
Imprint
Product identification
Circular Table Saw
Item number
TKS 200 - 230V
5902020
TKS 254 E - 230V
5902025
TKS 254 E - 400 V
5902026
TKS 254 PRO - 230 V
5902027
TKS 254 PRO - 400 V
5902028
Manufacturer
Stürmer Maschinen GmbH
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
Fax:
0049 (0) 951 96555 - 55
E-Mail:
Internet:
www.holzstar.de
Information on Operating Instructions
Original Operating Instructions
Edition:
15.04.2019
Version:
1.04
Language: English
Author:
FL/MS
Copyright Information
Copyright © 2019 Stürmer Maschinen GmbH, Hallstadt,
Germany.
The contents of these Operating Instructions are under
the exclusive ownership of Stürmer Maschinen GmbH.
Distribution and copying of this document, and any
usage and communication of its content are prohibited
unless expressly permitted. Any breach commits to da
-
mage compensation.
Technical changes and errors reserved.
Contents
Imprint..................................................... 2
1 Introduction ............................................. 3
1.1 Copyright ............................................................ 3
1.2 Customer service................................................ 3
1.3 Disclaimer ........................................................... 3
2 Safety ....................................................... 3
2.1 Legend of symbols.............................................. 3
2.2 Personal protective equipment ........................... 4
2.3 Operator responsibility........................................ 4
2.4 Operating staff qualification ................................ 5
2.5 Safety labels on the Circular Table Saw............. 5
2.6 Safety devices .................................................... 5
2.7 General safety instructions ................................. 6
3 Indended use ........................................... 7
4 Residual risks.......................................... 7
5 Technical Data......................................... 8
5.1 Type plate ........................................................... 8
6 Transport, packaging, storage............... 9
6.1 Delivery and transport......................................... 9
6.2 Packaging ........................................................... 9
6.3 Storage ............................................................... 9
7 Description of the Device ....................... 9
8 Scope of Supply .................................... 10
9 Set up before commissioning.............. 10
9.1 Requirements for the installation site................ 10
9.2 Montage der Circular Table Saw ...................... 11
9.3 Connection of the extraction system................. 14
10 Electrical connection .......................... 14
11 Assembly ............................................. 14
11.1 Mounting the saw blade.................................. 15
11.2 Assembly and adjustment of the splitting wedge... 15
11.3 Assembly and adjustment of the longitudinal stop ... 15
12 Commissioning ................................... 16
13 Work instructions................................ 16
13.1 Cutting wide workpieces ................................. 17
13.2 Cutting narrow workpieces ............................. 17
13.3 Cutting edges and strips ................................. 17
13.4 Setting Diagonal end stop............................... 17
13.5 Cross cutting narrow workpieces.................... 18
13.6 Work with the help of the angle stop............... 18
13.7 Suction............................................................ 18
13.8 Selection of saw blades .................................. 19
13.9 Replacing the saw blade................................. 19
14 Care, maintenance and overhaul/repair.. 20
14.1 Care after working .......................................... 20
14.2 Maintenance and repair / repair...................... 20
15 Troubleshooting.................................. 21
16 Disposal, recycling of used devices . 21
16.1 Decommissioning ........................................... 21
16.2 Disposal of electrical devices.......................... 22
16.3 Disposal of lubricants...................................... 22
17 Spare parts .......................................... 22
17.1 Order of spare parts........................................ 22
17.2 Spare parts drawings...................................... 23
18 Electrical schematic............................ 31
19 EC Declaration of Conformity ............ 32
20 Notes .................................................... 33
Summary of Contents for TKS 200
Page 33: ...Notes TKS Serie Version 1 04 33 20 Notes ...
Page 34: ...www holzstar de ...
