18
DH-Series | Version 1.01
Care, maintenance and repair
Fig. 20: Remove the blade guard
Step 4: Carefully turn cutterhead by hand.
Step 5: Loosen and remove six bolts from the gib.
Fig. 21: Remove the blade guard
Step 6: Remove gib using magnets provided.
Step 7: Blade is located in position by two pins. Gently
lift old blades from cutterhead using magnets.
Do not make contact with the blade using fin-
gers. Use magnet only.
Fig. 22: Blade change at the cutter head
Fig. 23: Blade change with the help of magnets
Step 8: Reverse or replace blade and carefully position
it on the two pins using magnets.
Step 9: Reset the bar and align the holes of the bar with
the holes of the holes on the knife by using the
magnets.
Step 10: Secure gib to cutterhead using six bolts removed
earlier.
9.5 Servicing
As a result of wear and tear, maintenance work may
have to be carried out on the machine.
If the planer does not function properly, contact a spe-
cialist dealer or our customer service. The contact de-
tails can be found in chapter 1.2 Customer service.
All protective and safety devices must be reinstalled im-
mediately after completion of repair and maintenance
work.
ATTENTION!
Blade edges are extremely sharp. Keep fingers
away from blades at all times.
Leisten-
schrauben
Messer
Stift
Messerkopf
Leiste
WARNING!
Only use suitable planing knives. Unsuitable, or
incorrectly mounted, blunt, or damaged planing
knives can come loose and/or significantly increase
the risk of recoil.
- Mount only with original parts.
NOTE!
Maintenance work may only be carried out by quali-
fied personnel with mechanical knowledge.
