Installation and connection
ADH-Series | Version 1.02
11
6.1 Scope of delivery
- Planer-Thicknesser
- Convertible chip suction hood
- Integrated suction
- Chip collection bag
- Infinitely adjustable aluminium truing fence from
0° to 45°
- Operating Instructions
6.2 Accessories
- Replacement filter bag ADH 2540
Item number: 5914060
- Replacement filter bag ADH 3050
Item number: 5914061
- Suction hose ADH 2540 & 3050
Item number: 5914062
- Replacement planer blade set 2 St. ADH 2540
Item number: 5914063
- Replacement planer blade set 2 St. ADH 3050
Item number: 5914064
7
Installation and connection
7.1 Requirements for the installation
site
The Planer-Thicknesser must be placed on a level and
solid surface to ensure stability. The installation site
should meet the following criteria:
- The substrate must be level, firm and vibration-free.
- The subfloor must not let any lubricants through.
- The installation or working area must be dry and well
ventilated.
- No machines that produce dust and chips should be
operated near the machine.
- Sufficient space must be available for the operating
personnel, for material transport and for adjustment
and maintenance work.
- The installation site must have good lighting.
- A suction device must be available with a suction ca-
pacity of at least 690 m3/h, min. 20 m/s
- Flow velocity at suction connection; hose diameter
see technical data, max. hose length 4 m.
7.2 Setting up the Planer-Thicknesser
The surface and thickness planer is delivered in one box
and is already largely assembled. Only a few parts have
to be assembled after delivery. With the following steps
the machine is made ready for operation:
Step 1: Check the carton contents for the following.
Fig. 6: Carton contents
CAUTION!
Danger of injury from a machine that is not stable!
Check the stability of the machine after it has been set
up on a stable surface.
CAUTION!
Observe the weight of the machine!
The machine may only be set up by two persons to-
gether. Check auxiliary equipment accordingly for suf-
ficient dimensioning and load capacity.
DANGER!
To ensure sufficient stability of the machine, it should
be bolted to the ground. For this purpose there are 4
holes at the bottom of the machine housing.
DANGER!
Do not connect the machine to the mains until it is
completely and correctly installed.
Summary of Contents for ADH 2540 230V
Page 26: ...www holzstar de ...